Menu
  • Welcome to OH2018
  • OH2018 takes place from 16 - 19 April 2018 in Stratford-upon-Avon, UK
  • PDC's will be running on Monday 16 April 2018
  • Programme is now available
  • Registration is open, book now
  • Submit your Poster or Ignite Abstract

Vent-Tech equips companies to minimise the human and business cost of dust, fume and other airborne contaminants at work. Using our expertise as industrial ventilation suppliers, we design and install dust and fume extraction systems; systems that mitigate these costs.

The proper installation of an LEV system will safeguard the health of the employees. It is a very technical area of expertise and the requirements on businesses are highly regulated. Therefore, if you are choosing a company to design and install a system, you need to be sure that they have the required qualifications and experience.

All Vent-Tech’s design, testing and commissioning engineers are BOHS qualified and have considerable experience. Our designs comply with the relevant Heath & Safety recommended practises so you can have the confidence that your employees are being protected from the hazardous substances being extracted, as long as they are installed properly and serviced regularly.

We even have the ability to model the ventilation system’s design on our SolidWorks software. This programme produces a 3D representation of the design and simulates how the ventilation system’s airflow and velocity will work via animation.

The Institute of Occupational Medicine (IOM) is an internationally-recognised provider of workplace health & safety consultancy, research, and laboratory services, supporting clients around the world from our headquarters in Edinburgh and regional offices in London, Stafford, Chesterfield and Singapore.

The main focus of our work is associated with helping clients understand and mitigate the risks to health from hazards in the workplace and in the wider environment. This includes occupational hygiene and safety advice; expert witness services; training; hazard and risk assessments; asbestos sampling, monitoring services & management; and laboratory services to identify & quantify chemicals and hazardous substances.

Since being established in 1969, we have extended our remit to provide consultancy and research to support emerging technologies, regulatory compliance, environment and public health, and to the provision of industry-standard accredited scientific services to support occupational hygiene professionals.

Cority (formerly Medgate) is the most trusted HSEQ software for assuring client success. Cority enables organizations to utilize Health, Safety, Environmental and Quality (HSEQ) software solutions to advance their journey to sustainability and operational excellence. Cority consistently enables client success by combining the deepest domain expertise with the most comprehensive and secure SaaS platform. With 30+ years of innovation and experience, Cority’s team of 250 experts serve more than 800 clients in 70 countries, supporting millions of end users. The company enjoys the industry’s highest levels of client satisfaction and has received many awards for its strong employee culture and outstanding business performance.

SKC – Specialists in Air Sampling Technology

SKC has been supplying quality air sampling products for over 50 years for the occupational hygiene, environmental and indoor air quality professional – in fact, all that you need in both equipment and expertise for Dust, Gas/Vapour and Bioaerosol Sampling. Our all-encompassing range includes air sampling pumps, calibrators, filters, sorbent tubes, cassettes, gas sample bags, passive samplers and colorimetric detector tubes and accessories, and a range of direct reading instruments for particulate monitoring. Our team of skilled technicians have the experience and expertise to provide comprehensive servicing, calibration and repair on the extensive range of equipment we supply.

Please come and visit us at stand No: 2 and talk to us about what you need to do and our team can support you and recommend the equipment to suit your needs.

Gully Howard Technical are experienced professional training providers, proud to offer an extensive range of training courses, including all seven W500 Occupational Hygiene (OH Learning) Modules.

Established in 2004, we are BOHS, OH Learning, IATP, ABBE and British Safety Council approved training providers, recognised internationally for our Occupational Hygiene Training courses. We have successfully taught, and continue to teach OH Learning courses in many countries including; Azerbaijan, United Arab Emirates, Malaysia and more.

Training courses are delivered in-house by highly qualified lecturers with vast experience in their chosen fields, enabling them to combine relevant background theory with pragmatic practical advice. Of which this includes Senior Lecturer Phil Johns; a highly knowledgeable and well-known figure within the industry, and Paul Humphrey (CMFOH) Chartered Occupational Hygienist.

Concept Life Sciences provide an unrivalled range of routine and specialist analytical capabilities for the Air, Environmental, Food, and Pharmaceutical sectors. Our skilled and experienced scientists provide high quality results, rapid turnaround times and expertise in developing new methods. This is supported by dedicated project managers, readily accessible online LIMS and a bespoke courier service.

Our laboratories are equipped with state-of-the-art analytical instrumentation to enable fast, efficient, and accurate data with a design that can accommodate high sample numbers with attention to detail, efficiency, and safety. We understand industry demands and are committed to providing analytical services of the highest standard.

We hold an extensive scope of UKAS and MCERTs accreditation for the analysis of samples collected from Air Quality / Occupational Hygiene surveys, Occupational Health assessments and Site Investigation / Remediation projects. We have significant experience in the analysis of Active Pharmaceutical Ingredients, from method development and validation through to sample analysis. This includes validated methods for surrogates such as Lactose, Mannitol, Naproxen and
well-characterised generic API molecules. Our fleet of HPLC and UHPLC-MS, MS/MS instrumentation provides suitably low limits of detection appropriate for the OELs of increasingly potent active pharmaceuticals.

For more information visit www.conceptlifesciences.com.

The Health and Safety Laboratory (HSL) is Britain’s leading provider of health and safety solutions with over thirty years of pan-industry experience. Working closely with our clients we provide investigation of workplace and environmental hazards and their consequences on human health by bringing together expertise in occupational
hygiene, occupational medicine, a complete suite of analytical measurements including environmental monitoring, biological monitoring, clinical chemistry, physiology, microbiology and immunology. We can also offer expertise in ergonomics, work psychology, personal protective equipment, fire and explosion hazards, engineering and
computer modelling. Our work ranges from single investigations of exposure to a chemical, biological or physical hazard through to large scale surveys.

Shawcity is the UK’s largest supplier of occupational hygiene and environmental monitoring instruments – to hire or buy.

Long-standing partnerships with some of the world’s leading manufacturers allow us to provide the latest, highest quality technology to our customers. With a wide-ranging portfolio, each order is tailored to your specific requirements and we offer impartial advice to find the best solution for your project – every time.

We offer an extensive range of monitoring detection including:
– VOCs
– Benzene
– Ground Gas
– Single Gas
– Confined Space
– Multigas
– Gas Sensors
– Mercury
– Fixed Gas Detection Systems
– Sound, Noise & Vibration
– Air Quality & Dust
– Heat Stress

Our technical team provides support for the lifetime of your instrument or duration of hire for total peace of mind. Our manufacturer-trained and approved engineers also provide servicing, calibration and repairs at our own in-house service centre.

Casella provide innovative monitoring technology for the benefit of worker and community health. This includes sound level meters, noise dosimeters, air sampling pumps, real time dust analysers, hand vibration instruments and site boundary monitors. Connectivity is a common theme across Casella’s products, providing remote access to measurement data either via the web or mobile platforms.

The dBadge2™ personal noise dosimeter, Apex2™ with class beating performance and Airwave™ App ‘connected’ products feature Bluetooth™ connectivity to enable remote measurement without having to disturb the worker. The Airwave™ App allows summary data, photographs and notes to be emailed from the field to increase productivity for busy hygienists or safety professionals.

Casella wish to invite all delegates attending the BOHS annual conference (OH2018) to the Casella Social. This will be hosted at the Shakespeare Street Cocktail Bar Stratford upon Avon and will be an ideal opportunity to network and relax.